Trilithic

TFS-FS1

Optical Leakage Detector

TFS-FS1

Product Movie
  • Identify Fibers up to 300 Kilometers
  • Long Distance and Local Applications
  • Optimize Mechanical Splices and Connectors
  • Find Breaks in Dark Buffered Fiber
  • Locate Signals through Bulkheads / Dust Caps
  • Audio / Visual Leak Indication
  • Pinpoint faults to Within Inches

The TFS-FS1™ Optical Leakage Detector is designed to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending and to identify fibers over long distances.

This optical leakage detector is the most sensitive fiber light finding instruments on the market today. By simply sweeping over a fiber, the leak detector will give an audio and visual indication whenever it encounters a light loss point. Often performing the same function as a visible laser source, this product is used in OTDR dead zone areas or splice enclosures where exact pinpointing of a fault is critical.

The major advantage of the TFS-FS1 over a visible laser however is that it can “see” cable faults in bright room light and in many blue, green, and black coated fibers. Find light reflected from connectors mated in bulkhead adapters and even through some dust caps. Locate fibers at distances up to 300 kilometers, not just a few miles.

Accessories

  • Wide Band Filter (1280-1620 nm)

    Product Image

    The TFS-F1280™ Filter Kit is a is wide band IR filter (1280-1620 nm) designed to work with the TFS-FS1™ Optical Leakage Detector to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending and to identify fibers over long distances.

  • Narrow Band Filter (1310 nm)

    Product Image

    The TFS-F1310™ Filter Kit is a is narrow band IR filter (1310 nm) designed to work with the TFS-FS1™ Optical Leakage Detector to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending and to identify fibers over long distances.

  • Narrow Band Filter (1490 nm)

    Product Image

    The TFS-F1490™ Filter Kit is a is narrow band IR filter (1490 nm) designed to work with the TFS-FS1™ Optical Leakage Detector to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending and to identify fibers over long distances.

  • Aerial Lens and Scope Kit

    Product Image

    The TFS-TSA™ Aerial Lens and Scope Kit is designed to work with the TFS-FS1™ Optical Leakage Detector to identify aerial fiber breaks from the ground. The complete kit includes the aerial lens, red-dot scope, and narrow band IR filter (1550 nm).

Replacement Parts

  • Narrow Band Filter (1550 nm)

    Product Image

    The TFS-F1550™ Filter Kit is a is narrow band IR filter (1550 nm) designed to work with the TFS-FS1™ Optical Leakage Detector to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending and to identify fibers over long distances.

Related Items

  • TFS-FS1K505 Optical Leakage Detector Kit with TFS-201

    Product Image

    The TFS-FS1K505™ Optical Leakage Detector Kit is designed to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending and to identify fibers over long distances.

    Includes the Following:

    • TFS-201 Optical Light Source
    • TFS-FS1 Optical Leakage Detector
    • Wide Band IR Filter (1280-1620 nm)
    • TFS-TSA Aerial Lens & Scope Kit
    • Rugged Waterproof Carrying Case
    • AC to DC Power Adapter/Charger
    • Four (4) "AA" NiMH Rechargeable Batteries
    • One (1) 9 VDC Alkaline Battery
    • Operation Manual on CD

  • TFS-FS1K555 Optical Leakage Detector Kit with TFS-290

    Product Image

    The TFS-FS1K555™ Optical Leakage Detector Kit is designed to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending and to identify fibers over long distances.

    Includes the Following:

    • TFS-290 Optical Tracer Source (+5 dBm)
    • TFS-FS1 Optical Leakage Detector
    • Wide Band IR Filter (1280-1620 nm)
    • TFS-TSA Aerial Lens & Scope Kit
    • Rugged Waterproof Carrying Case
    • AC to DC Power Adapter/Charger
    • Four (4) "AA" NiMH Rechargeable Batteries
    • One (1) 9 VDC Alkaline Battery
    • Operation Manual on CD

  • TFS-FS1K557 Optical Leakage Detector Kit with TFS-291

    Product Image

    The TFS-FS1K557™ Optical Leakage Detector Kit is designed to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending and to identify fibers over long distances.

    Includes the Following:

    • TFS-291 Optical Tracer Source (+15 dBm)
    • TFS-FS1 Optical Leakage Detector
    • Wide Band IR Filter (1280-1620 nm)
    • TFS-TSA Aerial Lens & Scope Kit
    • Rugged Waterproof Carrying Case
    • AC to DC Power Adapter/Charger
    • Four (4) "D" NiMH Rechargeable Batteries
    • One (1) 9 VDC Alkaline Battery
    • Operation Manual on CD

  • TFS-201 Optical Light Source

    Product Image

    The TFS-201™ Optical Light Source allows simultaneous operation of both outputs or individual operation with CW, 30Hz, 500Hz, or 2kHz modulation for use with leak detectors or fiber identifiers. The optical light source operates at 1310 nm or 1550 nm with ST, SC & FC adapters.

    Includes the Following:

    • TFS-201 Optical Light Source
    • AC to DC Power Adapter/Charger
    • Four (4) "AA" NiMH Rechargeable Batteries
    • Operation Manual on CD

  • TFS-290 Optical Tracer Source (+5 dBm)

    Product Image

    The TFS-290™ Optical Tracer Source features a high power +5 dBm output with 2 kHz modulation allowing it to be used as tracer signal generator for use with the TFS-FS1™ Optical Leakage Detector and most popular fiber identifiers. The optical tracer source operates at 1550 nm with ST, SC & FC adapters.

    This source does not operate in CW (continuous wave) mode and may not be suitable for use in loss testing applications with some meters.

    Includes the Following:

    • TFS-290 Optical Tracer Source (+5 dBm)
    • AC to DC Power Adapter/Charger
    • Four (4) "AA" NiMH Rechargeable Batteries
    • Operation Manual on CD

  • TFS-291 Optical Tracer Source (+15 dBm)

    Product Image

    The TFS-291™ Optical Tracer Source features a very high power +15 dBm output with 2 kHz modulation allowing it to be used as tracer signal generator for use with the TFS-FS1™ Optical Leakage Detector and most popular fiber identifiers. The optical tracer source operates at 1550 nm with ST, SC & FC adapters.

    This source does not operate in CW (continuous wave) mode and may not be suitable for use in loss testing applications with some meters.

    Includes the Following:

    • TFS-291 Optical Tracer Source (+15 dBm)
    • AC to DC Power Adapter/Charger
    • Four (4) "D" NiMH Batteries
    • Operation Manual on CD

Warranty

Repairs

All repairs carry a 90-day warranty against defects in replacement parts and repair workmanship.

Products

All Trilithic products are warranted against defects in materials or workmanship for a minimum of one year after shipment.

Trilithic's obligation under this warranty is limited to the repair or replacement of the product after being returned to our factory, and Trilithic determining the product be indeed defective.

This is Trilithic's sole warranty and is given in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for a particular purpose and sets forth the buyers sole remedy.

The following products carry a Manufacturers One Year Warranty

8821Q, 8821Q-R & 8853Q Rotary & Benchtop Attenuators TFS-FS1
APSS-1B TFS-201 TFS-FS1K500 Series
DCVF-5 TFS-290 Series TLB-60
Impedance Matching Pads TFS-301 Tunable Filters
I-Stop TFS-401 VF-4 & VF-5
MetroNet 5020, 5100, 5120 & 5200 TFS-2000 Series  
Programmable RF Switches TFS-3200 Series  

The following products carry a Manufacturers Two Year Warranty

860 DSP & 860 DSPi 9581 SST R3 & 9581 SST R4 RSVP²
860 DSPh & Input Expander 9581 TPX Seeker Lite²
860 DSPr CT-2/ CT-3 Seeker
8300 FST Model Two Seeker MCA
8310 RSA Model Three Seeker BB-2

The following products carry a Dell Three Year Warranty

All Specially Configured Dell PowerEdge 2U Rack Mount Server products are warranted against defects in materials or workmanship for a minimum of three years after shipment. Dell provides next business day, parts and labor, on-site response for the following Trilithic products.

ADIA Integrated Server Package LAW Server Package
Guardian II Integrated Server Package Trilithic Data Manager (TDM) Integrated Server Package

 

Think Ahead.
Copyright © 2012 Trilithic, Inc. All Rights Reserved
Execution time: 1.24 seconds
Close

Translate Page

  • To translate page from English to another language, select a language from the drop-down list.
  • To return the page to English, click the Show Original button in the Google Translate bar at the top of the page.
  • To close Google Translate, click the X in the Google Translate bar at the top of the page. This also changes the page back to English.
  • To close this dialogue, click the Close button.
Notice: Translations are approximate.
Close

Session Alert

Notice: Your session is about to expire. If you would like to continue, please click the Continue button. Otherwise you will be logged out and must log back in to return to the current page.

Product Movie

Sign In

The document you are looking for has moved.

Please visit one of Trilithic's new websites.